I was listening to an MPLS tutorial on youtube.MPLS tutorial I came across this diagram. I am not that familiar with router configuration.My questions are as follows. 1) what does G1/0, G2/0, G3/0 and G4/0 shown in the diagram represent? It would be great if someone could clarify this. Answer It seems very likely to … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 8 years ago. Improve this question Computer A is running a program that initiates a request to Computer B on Port X. Where / how is the port transmitted … Read more
I have a netgear FVX538 firwall/gateway, 20mbps optic fibre link connected to WAN1, no connection on WAN2 and a link which I suppose to be a 2mbps MPLS line into a Cisco 1841 and in turn connected to one of the eight 10/100 LAN ports on the FVX538. I thought that having the MPLS line … Read more
In The MPLS LSR if I have 4 INPUT ports with 4 labels label:port 11 : 1 22 : 2 33 : 3 44 : 4 and ONE output port How many labels can exit through the output port/interface? or do they get aggregated into one label? Answer It really depends on the implementation and … Read more
No Internet access for all workstations Internet working for some servers, eg. DC MPLS network > Switch > workstation MPLS network > Switch > server Workstation troubleshooting – tracert google doesn’t make a single hop – local gateway and DC pingable – Ipconfig set correctly – check routes – no firewall DC troubleshooting DC can … Read more
We have established an MPLS between two locations. The DHCP helper is installed on the remote’s router and we can ping devices from/to either subnet. DHCP is working properly in both locations. However, our internal website located at the host cannot be found from the remote. The server’s address is 192.168.1.20 and it works fine … Read more
So basicly I have a setup which I want to get to work but i’m unable to. It’s possible I am overseeing a lot of things but let’s get to it anyways. The current situation is a network with 4 switches connected to each other (almost a full mesh, 1 link is missing intentionally). I … Read more
I would like to ask the community thoughts on the following. I have two data centers, one up ‘Norf, and one down South Both are isolated in terms of network, but both have public IPs on a dedicated private circuit. There is no MPLS between the two sites. I run a hosted PBX service and … Read more
I am currently looking at GCP to use as an addition within our existing infrastructure. I am looking at trying to set up a vrf so I can keep this traffic isolated from my current setup, I can’t find any documentation regarding vrfs or MPLS at all and was wondering if anyone has achieved this … Read more
Our ISP has provided us with a MPLS VPN connection to enable us communicate our other 3 branch offices with our head office. They provided us with WAN addresses for each dedicated router at our offices. Each of this routers are connected to a LAN for the internal networks at the office. We are currently … Read more
