This question already has answers here: Networking Units: Not getting expected performance from 100Mb Ethernet (3 answers) Closed 8 years ago. I could use some advice on this. I have a full 1.5MB up/down No matter if one person is here or 10, max rate at any given port is about 150 kB. I can’t … Read more
If you need to restore over a blank Cisco switch with a config backup taken using TFTP. I hear you can do this using copy and paste from the output given from show running-configuration on the live switch but that requires console access in order not to get cut off half way through the restore. … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 7 years ago. Improve this question I’ve got a 8-port J9079A managed switch here that I was using. Unfortunately, while configuring, I must have clicked the wrong option as … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 7 years ago. Improve this question How to practically find the back plane capacity of any Ethernet switch ? Also how to calculate the maximum TX and Rx load … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 6 years ago. Improve this question ive read in other topics that switches doesn’t understand IP and they only use MAC addresses i have a lot of NAS and … Read more
I am working at hotel and resort, and I want to build network for the hotel using cisco router and switch. the hotel customers number is up to 100 per day and there is 50 rooms. but i want to know each steps to configure the cisco router and switch to manage the lan and … Read more
Closed. This question needs details or clarity. It is not currently accepting answers. Want to improve this question? Add details and clarify the problem by editing this post. Closed 4 years ago. Improve this question New to Networking, Currently, I have Cisco sg 300 POE Manage Switch and want to make this switch as unmanaged. … Read more
I have a quesion regarding creating switch loops. I have 1 server with 2 network cards (nic1 and nic2) and 2 switches (sw1 and sw2) Question: Am I creating a switch loop if I connect nic1 to sw1 and nic2 to sw2 and I cascade sw1 and sw2? NOTE: no spanning tree in place Answer … Read more
It’s difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center. Closed 9 years ago. What is the difference between GBIC, SFP, SFP+? … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 6 years ago. Improve this question I am trying to make a campus network.I haven’t any experience. In campus,there are center building and many buildings.I use many switches(for pc,phone,sec-cameras) … Read more
