Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 9 years ago. Improve this question Can a Cisco Pix 501 be hacked to run Linux with a similar feature set? Is this possible? Has it ever been done? … Read more
I have a vlan configured behind a PIX and the main network can get to the internet but the vlan devices cannot get to the internet. I have tried configuring a virtual vlan interface on the inside interface but that didn’t help either. Any suggestions? Answer You need to configure your pix for authorize traffic … Read more
G’day, can any one tell me how to Mitigate UDP flood with PIX cheers Answer If this is a live flood, you can block attacking host with the shun command For general flood protection, take a look to threat-detection commands if you are running a recent PIX OS version. With more details we could help … Read more
What configuration lines/steps are required to enable WAN side SSH for the Cisco PIX? In addition what considerations should be made to ensure your connections are secure? Answer I’m answering and downvoting for laziness, because this is clearly a case of LMGTFY: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008069bf1b.shtml AttributionSource : Link , Question Author : JPrescottSanders , Answer Author : … Read more
I have the pix running on this network range 192.100.10.0 255.255.255.0 And my server which is on the network 192.200.10.0 255.255.255.0 And my servers IP: 192.200.10.11 I added these commands into the conf of the PIX static (inside,outside) tcp interface 80 192.200.10.11 80 netmask 255.255.255.255 access-list outside-inbound permit tcp any host xx.xx.xx.20 eq 80 Where … Read more
Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 … Read more
This is becoming rather frustrating. I’m trying to set up a VPN on a pix 501 using Cisco client v5. The connection is established fine but I cannot see the clients on the inside interface of the pix at all. Here’s the configuration. Note: ips for VPN clients are in the range of 192.168.20.x, those … Read more
Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn’t … Read more
This should be a simple edit, but for some reason I am stumped. We switched the ISP at a worksite. For these purposes I’ll post the new static IP info as: IP – 10.1.1.50 Sub – 255.255.255.0 GW – 10.1.1.1 And the old info as: IP – 10.2.2.100 Sub – 255.255.255.248 GW – 10.2.2.99 I … Read more
I read that a cisco pix 506e supports up to 25 vpn peers (sites), and unlimited clients (machines connected with the cisco vpn software?). The lowest cost option would seem to be to install the vpn software on all the remote clients (desktops,laptops) – currently about 100 machines. Does this seem reasonable, or is there … Read more
