Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 9 years ago. Improve this question Can a Cisco Pix 501 be hacked to run Linux with a similar feature set? Is this possible? Has it ever been done? … Read more
G’day, can any one tell me how to Mitigate UDP flood with PIX cheers Answer If this is a live flood, you can block attacking host with the shun command For general flood protection, take a look to threat-detection commands if you are running a recent PIX OS version. With more details we could help … Read more
I have the pix running on this network range 192.100.10.0 255.255.255.0 And my server which is on the network 192.200.10.0 255.255.255.0 And my servers IP: 192.200.10.11 I added these commands into the conf of the PIX static (inside,outside) tcp interface 80 192.200.10.11 80 netmask 255.255.255.255 access-list outside-inbound permit tcp any host xx.xx.xx.20 eq 80 Where … Read more
Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 … Read more
Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn’t … Read more
This should be a simple edit, but for some reason I am stumped. We switched the ISP at a worksite. For these purposes I’ll post the new static IP info as: IP – 10.1.1.50 Sub – 255.255.255.0 GW – 10.1.1.1 And the old info as: IP – 10.2.2.100 Sub – 255.255.255.248 GW – 10.2.2.99 I … Read more
I read that a cisco pix 506e supports up to 25 vpn peers (sites), and unlimited clients (machines connected with the cisco vpn software?). The lowest cost option would seem to be to install the vpn software on all the remote clients (desktops,laptops) – currently about 100 machines. Does this seem reasonable, or is there … Read more
Understanding that my problem could have a very vast scope of possibilities, I’ll accept the answer that points me to something that I might have missed. My software’s client is facing this issue of page stopping loading in the middle and that too happens randomly. As usual, this does not happen in out network even … Read more
The company I work for has a client that has a Cisco PIX 506e firewall running v6.3. The PIX is currently set up to manage PPTP VPN connections using the local Windows domain controller as a RADIUS server. The PIX does not support MSCHAP v2 connections, so users cannot connect from Windows 7 workstations. Our … Read more
I have a remote site with a website that only allows access from the outside IP assigned to our local PIX. I have users connecting to the local networking using a VPN that need to be able to view this remote site. I don’t think this works because the packets want to come in and … Read more
