I tried to get the chassis status of client servers via ipmitool. Command I used is below. “ipmitool -I lanplus -U ADMIN -P ADMIN -H 192.168.1.xxx chassis power status” M/B model:X9DRW-7TPF+ FW version:3.0b But it failed to get status on some servers, massages is below. “Get Chassis Power Status failed: Insufficient privilege level” I confirmed … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 7 years ago. Improve this question I can’t find a software to manage servers, connect to remote console, reboot, power cycle, see temperatures etc, only if I enter by … Read more
i’m a total noob about ipmi, fencing and ha, i want to create node with high availability. wanna fencing node with ipmi. root@proxmox01:~# ipmitool sensor Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Device ID command failed Unable to open SDR for reading question 1, how to … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 7 years ago. Improve this question I want to install an OS on a server using IPMI. How do you know the IP address to connect to using IPMI? … Read more
I have an ubuntu(18.04.2 LTS) image running on a HP DL20, This server has a dedicated iLO, but i fear some settings are wrong as i cant reach the iLO. I would like to install open ipmi on the server to check gateway/subnet thats set in the bios. However my server does not have external … Read more
I’m putting an older Supermicro X9DRG-QF motherboard back into service as a VM host. The machine did a great and error-free tour of duty in a digital installation a while back, so I can confirm it was working fine in a previous life. I have upgraded the RAM to 128GB with 8x16GB DDR3-1866MHz PC3-14900 ECC … Read more
I want to get disk status of esxi server using ipmi. I can not find the right command to get this information: /usr/sbin/ipmitool -I lan -H 192.168.x.x -U xxx -P xxx -S /tmp/ipmi-sdr-cache Which commands shoud i add to get information about disk space, free space … ? Answer You can’t. IPMI is working below … Read more
is there a windows application to read the IPMI data on my HP ML110 G4 server? I need to monitor the temperature levels. I can view raw IPMI data in the BIOS, but this is no use while the server is running! Answer This is tricky… Older 100-series ProLiant servers lacked the management features of … Read more
We’ve got ML350 G5 servers with iLO 2 standard license. Does upgrading to higher iLO license will unlock new SNMP or IPMI data registers? If it will, which ones? Answer Does upgrading to higher iLO license will unlock new SNMP or IPMI data registers ? No. ILO2 Advanced gives you additional remote media and console … Read more
Closed. This question is off-topic. It is not currently accepting answers. Want to improve this question? Update the question so it’s on-topic for Server Fault. Closed 3 years ago. Improve this question I have a requirement to disable http port for the IPMI console for a rhel server. Where should I start? Answer The answer … Read more
